Introduction
The Pinnacle–KR402 II is composed of:
1x Thunder–KS3 I self–powered subwoofer
1x Thunder–KS3P I passive subwoofer
4x Python–KP102 I stainless steel line array element with 3.15” drivers
4x K–JOINT3
2x K–FOOT3
The self–powered Thunder–KS3 I subwoofers with DSP are designed to be the core devices in the sound reinforcement system: the dedicated K–array Connect mobile app provides a user–friendly interface for the remote control, the DSP parameters and to boost the system performance.
K–framework3 is the managing and control software dedicated to professionals and operators looking for a powerful tool for designing and managing a large number of units over a wired LAN in demanding applications.
Technical sheet
Python–KP102 I
General
-
Type:
Line array
-
Transducers:
12 x 3.15″ neodymium magnet woofers
-
Frequency Response:
120 Hz – 18 kHz (–6dB)
(1) -
Max SPL:
134 dB (peak)
(2) -
Rated Power:
720 W AES
-
Coverage:
V. 7° – 30° | H. 90°
-
Connectors:
SpeakOn NL4 1+ 1– (signal); 2+ 2– (through)
-
Nominal Impedance:
4 Ω / 16 Ω selectable
-
Sensitivity (1W/1m):
99 dB SPL
-
Max SPL (Full–Range preset):
122 dB (peak)
(3) -
Frequency Response (Full–range preset):
70 Hz – 18 kHz (–6dB)
(4)
Handling and Finishes
-
Dimensions (W x H x D):
89 x 1000 x 118 mm (3.5 x 39.4 x 4.7)
-
Weight:
12.0 kg (26.5 lb)
-
Material:
Stainless Steel
-
Colors:
Black, White, Custom RAL
-
Finishes:
24K Gold, Polished, Brushed
Regulations
-
IP rating:
IP64
(5) -
EN54–24:
EN 54–24:2008 compliant
(6)
- (1) With dedicated preset.
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
- (3) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
- (4) With dedicated FULL–RANGE preset
- (5) More complete water protection with K–IP65KITA and K–IP65KITB accessories (IP65 compliant)
- (6) See specification for EN 54–24 applications in products user’s guide
-
Passive loudspeakers require a dedicated preset loaded onboard K–array amplifiers.
-
New materials and design are introduced into existing products without previous notice.
Thunder–KS3P I
General
-
Type:
Passive subwoofer
-
Transducers:
21″ neodymium magnet woofer
-
Frequency Response:
30 Hz – 150/300 Hz (–6 dB) crossover dependant
(1) -
Crossover:
DSP–controlled, Low Pass @ 150 Hz, preset dependant
-
Max SPL:
139 dB
(2) -
Rated Power:
2800W peak
-
Coverage:
Omni
-
Connectors:
2 x SpeaOn NL4
-
Nominal Impedance:
4Ω
Handling and Finishes
-
Dimensions (W x H x D):
735 x 580 x 700 mm
(28.9 x 22.83 x 27.55 in)
(3) -
Weight:
49,2 kg (108.5 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP rating:
IP54
(4)
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K–array directly to discuss best protection practices.
-
Passive loudspeakers require a dedicated preset loaded onboard K–array amplifiers.
-
New materials and design are introduced into existing products without previous notice.
Thunder–KS3 I
General
-
Type:
Active subwoofer
-
Transducers:
21″ neodymium magnet woofer
-
Frequency Response:
30 Hz – 150/450 Hz (–6 dB) crossover dependant
(1) -
Crossover:
DSP–controlled, Low Pass @ 150 Hz, preset dependant
-
Max SPL:
139 dB
(2) -
Coverage:
Omni
-
Connectors:
Line Input
2x XLR–F analog / AES3
Line Output
2x XLR–M Link analog / AES3
Speaker Output
2x SpeakON NL4
Power
powerCON TRUE1 TOP
Networking and Data
1x RJ45
4x USB–A
-
Nominal Impedance:
4ohm subwoofer
-
Controllers:
Wi–Fi dedicated Mobile APP
K–framework3 via wired Ethernet connection
-
Built–in DSP:
Input gain, routing matrix, delay, full parametric IIR filters (Peaking, Shelving, Hi/ Lo pass, Hi/Lo Butterworth), Onboard preset, Remote monitoring
Handling and Finishes
-
Dimensions (W x H x D):
735 x 580 x 700 mm (28.9 x 22.83 x 27.55 in)
(3) -
Weight:
56 kg (123.4 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP rating:
IP53
(4)
Amplifier
-
Amp Module:
4–ch Class D
-
Output Power:
4 x 2500W @ 4ohm
(5) -
Power Consumption:
600 VA @ 8 Ω load, Pink noise, 1/8 rated power
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K–array directly to discuss best protection practices.
- (5) CTA–2006 Standard single channel driven
-
New materials and design are introduced into existing products without previous notice.
