Introduction
LumiNode 2 is specifically designed with an all metal, robust enclosure, to mount on a fly bar or a wall, making it an ideal solution for theatre– and studio AV installs or for use at live performances.
Equipped with 2x 1Gb Ethercon ports and 2x 5–pin DMX ports LumiNode 2 offers flexibility in a small package. Each DMX port is fully optically and galvanically isolated and can be configured as an in– or output. All relevant industry standard protocols such as Art–Net, sACN, KiNET, RTTRpl (Blacktrax) are supported and can be processed and converted by the 4 onboard process engines supporting HTP, LTP, Crossfade, Backup, Switch and Custom merging modes with soft patch functionality.
Features
Industry protocols
All relevant industry–standard protocols such as Art–Net, sACN, KiNET, RTTrPL (Blacktrax) are supported.
The LumiNode family is fully DMX/RDMcompatible. LumiNet Monitor and other third party RDM software or lighting consoles (supporting ArtNet RDM) can make use of the full RDM functionality.
Intuitive UI
The built–in web UI delivers a great user experience.
Process engines can be easily configured in a very intuitive workflow. Just decide what you like to do with your lighting data by choosing the mode of the process engine.
Depending on the chosen merging/routing policy of the engine, the UI presents all possible input configurations. From here you just connect your input streams and your output connections.
Everything can be easily stored and recalled into profiles for later usage.
Advanced networking
Use the full capacity of the Gigabit connectivity by sending different data in a different Group (VLAN). Setup a separate interface for IT monitoring without interfering with critical lighting data.
The known Group (VLAN) technology from GigaCore switches is also available in the LumiNode product family. This allows you to freely assign a different Group (VLAN) to the different network connectors and to the node’s interfaces.
ISL (Inter Switch Link) and custom trunks are available to transfer different VLANs on one ethernet connection.
Lecture & contact sec
Play allows you torecord snapshots of all your output streams in a show as a cue list with fade times. This show can later be used as an input source of a process engine.
THE contact closure can be configured as a trigger on the network and be used as any other trigger source to control the playback of the recorded queue list.
Integration with web API
LumiNode features a fully documented web API , making the unit ideal forintegration and automation in installation projects.
Toute configuration ou manipulation (comme rappeler des profils, configurer des moteurs, déclencher la lecture,…) peut être effectuée via l’API web (REST/JSON). Offrant la flexibility to integrate with any other hardware or software to control your infrastructure.
Technical sheet
Specifications
Connectivity
- Connectivité DMX/RDM : 2x Neutrik 5 pin XLR (femelle) blindé & plaqué or
- Ethernet connectivity: 2x shielded Neutrik Ethercon connector
- Contact closure: Yes
- Power connectivity: Ethernet (PoE 802.3af class 0)
DMX features
- DMX protocols:
- DMX512 (1986 & 1990)
- DMX512–A ANSI E1.11
- RDM ANSI E1.20–2010
- DMX port direction: Input or output (configurable)
- DMX port isolation: Optical and galvanic isolation per port
- DMX timing:
- Framerate: 10–40fps
- Break: 176–352µs
Network features
- Ethernet protocols:
- Art–Net™ (1–4)
- sACN ANSI E1.31
- RTTrPL (BlackTraX)
- KiNET v1, v2
- Ethernet port speed: 10/100/1000Mbps
- Port sensing:
- Auto–negociation
- MDI / MDIX
- Split management interface: Yes
- Groups (VLAN) support: Yes
Key features
- Process engines: 4
- Merging engine:
- HTP
- LTP
- Backup
- Switch
- X–Fade
- Custom
- Softpatch: Yes
- Master/Limit:
- Proportional
- Limit
- Trigger system: Yes
- ReRoute: Yes
- Profile manager: Yes
- Snapshot: Yes
- DMX Redundancy: Yes
- Monitoring software: LumiNet Monitor
- Configuration:
- Built in Web server
- Documented Web API
Status
- Display and jog: No
- Status LEDs:
- Ethernet Port: link/activity LED and Group RGB LED
- DMX Port: DMX/RDM LED
Power
- Power input: PoE IEEE 802.3af (Class 0)
- Power consumption: Maximum 8,5W
- Power redundancy: No
Environmental
- Operating temperature: 0 tot +60°C
- Storage temperature: –10 tot +70°C
- Humidity (non condensing): 5 to 95% RH
Physical
- Enclosure: Robust metal housing
- Mounting:
- Truss or fly bar
- Wall
- Dimensions (W x D x H): 158 x 146 x 50,5 mm
- Weight: 0,9 kg
- Packaging: 240 x 230 x 80 mm
Approvals
- Electromagnetic emissions and immunity:
- EN55032 class A
- EN55035
- EN61000–3–2
- EN61000–3–3
- EN61000–4–2
- EN61000–4–4
- EN61000–4–5
- EN61000–4–6
- EN61000–4–8
- EN61000–4–11
- FCC Part 15 CFR 47 class A
- ICES–003 Issue 6
- Safety:
- IEC 62368–1
- EN 62368–1
- UL 62368–1
- CAN/CSA–C22.2 No. 62368–1
- CE
- Certificates:
- cSGSus Mark
- CE
- CB certificate
- Green:
- RoHS
- REACH
Product codes
- Product codes: LU 01 00070 (LumiNode 2 with PoE input)
