Introduction
The Firenze–KH8 is a powerful, top–of–the–line touring system featuring Slim Array Technology (SAT) and Electronic Beam Steering (EBS). Self–powered and weather resistant, the KH8 produces an exceptional peak output of 145 dB SPL and is fully controlled by 8 onboard DSPs for maximum operational flexibility offering a unique solution to the live sound market. The state–of–the–art rigging system allows you to pre–cable stacks of 3 units to fly a straight 24–unit cluster in less than 10 minutes. This is possible because it is not necessary to dismount the entire cluster: the speakers are anchored in groups of three within rigid frames that can be connected quickly to create longer clusters. Compared to traditional systems that require wiring and a mechanical connection for each speaker, the KH8 cuts down on time for a cost–sensitive solution. Our Firenze–KH8 is a powered IP45 system with an integrated IP65 electronic enclosure, to resist even heavy rain.
Technical sheet
Specifications
General
-
Type:
Active line array element
-
Transducers:
8x woofer à aimant Néodyme de 8″ avec bobine mobile de 2,5″
8x drivers à aimant Néodyme de 4″ avec bobine mobile de 1,5″
4x driver de compression à aimant Néodyme avec bobine mobile de 1,5″
-
Frequency Response:
70 Hz – 18 kHz (–3 dB)
(1) -
Max SPL:
145 dB peak
(2) -
Coverage:
Horizontal: 120°
Vertical: digitally adjustable with Electronic Beam Steering
-
Remote Control:
Remote control with dedicated PC software via Ethernet
-
Connectors:
Analog, AES3 and Remote control:
Easy–grip metal locking LK25 connector (MIL C 5015 and VG95234 spec.)
Digital Signal Processor
-
Built–in DSP:
Input gain, delay up to 2 s,
Full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
FIR filter for digital beam steering
Level and Temperature remote monitoring
Handling and Finishes
-
Dimensions (W x H x D):
1170 x 500 x 226 mm (46.1 x 19.7 x 8.89 in)
-
Weight:
75,2 kg (159.84 lb)
-
Material:
Stainless Steel
-
Colors:
Black, Custom RAL
Regulations
-
IP Rating:
Speaker Box: IP45 / Electronics: IP65
Amplifier
-
Amp Module:
4–ch., switch mode, class D
-
Output Power:
8x 2000 W @ 4 Ω 1% THD+N
-
Power Consumption:
1250 W @ 4 Ω load, Pink noise 1/8 rated power
-
Protections:
Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
-
Operating Range:
100–240V AC, 50–60 Hz with PFC
-
Mains Connector:
powerCON True
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
