Introduction
DN4888
The DN4888 is the perfect solution for connecting additional equipment to your monitor or FOH console. It provides 8 additional analogue in and outputs to enable for 8 analogue inserts or the connection to wireless devices, like 8 wireless microphones and 8 wireless in–ear systems.
Features
-
Breakout box with 8 balanced XLR line in and 8 balanced XLR line out for StageConnect systems
-
Can be used as analogue I/O box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers, such as P16 personal monitoring mixers
-
StageConnect 32–channel audio transmission at sub–millisecond latency, 24–Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
-
Allows cascading with other StageConnect boxes, such as DN4816–I and DN4816–O for more analogue inputs and outputs
-
Flexible connectivity on stage and between side racks using any balanced microphone cable
-
Supports bi–directional audio configurations, with control data and 12 VDC / 18 W remote power
-
Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
-
Les modes esclave offrent des configurations de canaux 8×8 ou 16×8 à utiliser avec des consoles de mixage, stageboxes et hubs compatibles StageConnect
-
Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect and analogue inputs
-
External power supply for standalone use and offering remote power on the StageConnect Master output
Technical sheet
Specification
Processing
A/D Conversion |
24–Bit, 48/44.1 kHz, 114 dB |
StageConnect bus capacity |
32 ch, 24–Bit PCM audio |
I/O latency |
< 0.05 ms |
Connectors
Analogue inputs |
8 x XLR female jacks, balanced |
Impedance |
20 kΩ unbalanced / 40 kΩ balanced |
Max. input level |
+21 dBu |
Analogue outputs |
8 x XLR male jacks, balanced |
Impedance |
100 Ω unbalanced / 200 Ω balanced |
Max. output level |
+21 dBu |
Ultranet |
2 x RJ45 |
Shielded CAT5e cable max. length |
75 m |
StageConnect |
1 XLR male, 1 XLR female |
Shielded bal. 110–Ohm DMX cable |
max. 40 m |
USB |
Type B |
System
Frequency Response |
20 Hz – 20 kHz ±0.2 dB |
Dynamic range |
110 dB DA / 106 dB AD |
Cross talk rejection @ 1 kHz, adjacent channels |
110 dB DA / 104 dB AD |
Noise (20 Hz – 20 kHz bandwidth) |
–90 dBu DA / –106 dBFS AD |
Distortion |
0.004% DA @ 0 dBu 0.004% AD 1 kHz |
Power
Power |
12 VDC / 2.5 A (30 W) adapter included, remote power input via SLAVE XLR (female), remote power output via MASTER XLR (male) 12 VDC / 1.5 A (18 W) |
Power Consumption |
8.5 W |
Physical
Standard Operating Temperature Range |
5° – 45° C (41° – 113° F) |
Dimensions |
49 x 483 x 169 mm (1.9 x 19.0 x 6.7″) |
Weight |
2.2 kg (4.9 lbs) |