Introduction
CPA1201
Amplificateur de Mixage Commercial de 120 Watt offre la solution parfaite pour les applications commerciales et industrielles nécessitant un son distribué de grande qualité associé à la conservation d’énergie et à la réduction des coûts d’exploitation. Capable de fournir un son de haute qualité sur des configurations de haut–parleurs Low–Z (4/8 Ohm) et High–Z (70/100 V) offrant une flexibilité extrême sur chaque canal. Le CPA1201 est facile à installer et à utiliser – même pour le personnel non technique. En bref, le CPA1201 est idéal pour les bars & restaurants, les destinations de vente au détail, les hôtels, les entreprises, l’éducation ou d’autres lieux nécessitant de la musique d’ambiance et/ou un système de sonorisation.
Features
-
120 Watt mixer amplifier for commercial and industrial applications
-
Low–Z (4/8 Ohm) and High–Z (70/100 V) operation with switchable high–pass filter
-
3 mic/line inputs plus 2 line inputs each with individual volume controls and output routing
-
High–quality media playback via Bluetooth streaming
-
USB media player with intuitive LCD navigation to play audio files via USB stick
-
Individual front panel master volume and bass/treble controls
-
Configurable priority and chime muting function for background music override
-
Direct drive, constant power technology for superior audio performance and reliability
-
GPI remote volume control using standard RJ–45 connector and Ethernet cable
-
Auto Ramp circuitry for quiet and fast power up/down enables real–world energy savings
-
Front panel power control button for direct access
-
Aux output for expansion to additional amplifiers
Technical sheet
Specification
Maximum Output Power
| 4 or 8 Ω per channel |
120 W |
Number of amplifier channels
| Number |
1 |
Minimun Load Impedance
| 4 Ω mode |
4 Ω |
| 8 Ω mode |
8 Ω |
| 70 V output mode |
41 Ω |
| 100 V output mode |
82 Ω |
Audio Outputs
| Amplifier output |
2–pin Euroblock connector, stereo |
| Aux output |
3–pin Euroblock connector |
| Aux output max level |
4.88 V (16 dBu) |
Audio Inputs
| Mic/Line with priority/ ducking input |
1 x 5–pin Euroblock connector (channel A) |
| Mic/Line with summed RCA |
2 x 3–pin Euroblock connector, 3 x stereo RCA |
| Impedance |
Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ |
| Input sensitivity for max amplifier output or max aux output level |
Mic: 0.038 V (–26 dBu) Balanced: 1.23 V (+4 dBu) RCA: 0.62 V (–2 dBu) each for mono sum RCA |
| Maximum Input Level |
4.88 V (+16 dBu) |
| Microphone phantom voltage |
48 V |
Controls
| Front |
Power standby button, input and output gain control, tone controls – bass and treble, bluetooth audio controls |
| Rear |
Load config – (4 Ω/8 Ω/70 V/100 V), switchable 80 Hz high–pass filter, mic/line switch, vox/ducking threshold control, phantom voltage, input routing (2–channel models only) |
Tone Controls
| Bass |
±10 dB @ 100 Hz |
| Treble |
±10 dB @ 10 kHz |
Indicators
| Power |
On (blue), force standby (red), standby (yellow) |
| Inputs |
Signal (LED verte) : >12.3 mV (–36 dBu) Défaut (LED rouge) : Clip |
| Master |
Signal (LED verte) : >–50 dBu |
Bluetooth
| Frequency range |
2402 – 2480 MHz |
| Number of channels |
79 |
| Bluetooth version |
4.2 |
| Reception range |
Up to 15 m (45 ft) |
| Output power |
10 dBm |
| Supported codec |
SBC |
| Supported profiles |
AVRCP 1.4, A2DP 1.2 |
USB Drive Requirements
| Type |
USB 2.0 |
| Min capacity |
1.0 GB |
| Min speed |
12 MB/s read, 7 MB/s write |
| Supported file formats |
AAC, WMA, MP3, WAV |
System
| Output circuit type |
Class D |
| Remote connector |
1 x RJ45 Ethernet connector |
Performance
| Distortion, 1/8 rated power |
<0.5% |
| Frequency Response |
20 Hz to 20 kHz, +0.5/–2 dB |
| Crosstalk (2 channel model) |
>70 dB |
| Signal–to–noise |
>95 dB |
| High–pass filter |
80 Hz HPF |
Circuit Protection
| Cooling |
Convection–cooled, fanless |
| Amplifier protection |
Thermal protection, over current protection, DC protection |
| Load protection |
Controlled start and shutdown behaviour, DC–fault protection |
Power Supply, Voltage (Fuse)
| Main voltage |
100–240 V~, 50/60 Hz |
| Fuse |
T 3.15 A L 250 V |
| Power consumption 1/8th rated power @ 4 Ω |
50 W |
| Mains connector |
Standard IEC connector |
Dimensions (H x W x D)
| Dimensions (H x W x D) |
44 x 437 x 248 mm (1.7 x 17.2 x 9.8″) |
| Weight |
3.1 kg (6.8 lbs) |
| Finish |
Brushed black anodized aluminum chassis with black painted steel bottom |
