Introduction
Le système Pinnacle KR102 est une combinaison de 2x subwoofers 12″ (Thunder–KS1 I + Thunder–KS1P I) avec 2x enceintes colonne pures array élégantes et puissantes Kobra–KK102 I. Le subwoofer Thunder–KS1 l auto–alimenté pilote à la fois le Kobra–KK102 l sur son sommet et un système de colonne passive séparé composé du subwoofer Thunder–KS1P l. Le subwoofer Thunder–KS1 l auto–alimenté avec DSP est conçu pour être l’appareil central du système de renforcement sonore : l’application mobile dédiée K–array Connect offre une interface conviviale pour le contrôle à distance, les paramètres DSP et pour améliorer les performances du système. Résultant en un système portable léger, flexible et élégant, la fine intégration des enceintes line array Kobra–KK102 l avec le subwoofer compact et puissant Thunder–KS1 l délivre un son pur dans toute application comme les soirées lounge, événements privés, restaurants, cafés, yachts et lieux de culte.
Technical sheet
Thunder–KS1 I
General
-
Type:
Active subwoofer
-
Transducers:
Woofer à aimant néodyme 12″
-
Frequency Response:
35 Hz – 150/450 Hz (–6 dB) crossover dependant
(1) -
Crossover:
DSP–controlled, Low Pass @ 150 Hz, preset dependant
-
Max SPL:
134 dB
(2) -
Coverage:
Omni
-
Coverage:
Line Input
2x XLR–F analog / AES3
Line Output
2x XLR–M Link analog / AES3
Speaker Output
2x SpeakON NL4
Power
powerCON TRUE1 TOP
Networking and Data
1x RJ45
4x USB–A
Handling and Finishes
-
Dimensions (W x H x D):
500 x 350 x 440 mm
(19.7 x 13.8 x 17.3 in)
(3) -
Weight:
21,6 kg (47.62 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP rating:
IP53
(4)
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K–array directly to discuss best protection practices.
-
New materials and design are introduced into existing products without previous notice.
Thunder–KS1P I
General
-
Type:
Passive subwoofer
-
Transducers:
Woofer à aimant néodyme 12″
-
Frequency Response:
35 Hz – 150/450 Hz (–6 dB) crossover dependant
(1) -
Crossover:
External DSP–controlled,
Low Pass @ 150 Hz up to 450 Hz, preset dependant
-
Max SPL:
134
(2) -
Rated Power:
1200W peak
-
Coverage:
Omni
-
Coverage:
2 x Speakon NL4
-
Nominal Impedance:
8ohm
-
Disclaimer:
Passive loudspeakers requires dedicated preset loaded on board of K–array amplifiers.
-
Disclaimer:
New materials and design are introduced into existing products without previous notice.
Handling and Finishes
-
Dimensions (W x H x D):
500 x 350 x 440 mm
(19.7 x 13.8 x 17.3 in)
(3) -
Weight:
18 kg (39.7 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP rating:
54 (5)
(4)
Amplifier
-
Amp Module:
–
-
Output Power:
–
-
Power Consumption:
–
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K–array directly to discuss best protection practices.
Kobra–KK102 I
General
-
Type:
Line array
-
Transducers:
16 x 2″ woofers à aimant néodyme
-
Frequency Response:
150 Hz – 18 kHz (–6 dB)
(1) -
Max SPL:
126 dB (peak)
(2) -
Rated Power:
400 W
-
Coverage:
V. 7° – 35° | H. 120°
-
Connectors:
SpeakOn NL4 1+ 1– (signal); 2+ 2– (through)
-
Nominal Impedance:
8 Ω / 32 Ω selectable
Handling and Finishes
-
Dimensions (W x H x D):
59 x 1000 x 81 mm (2.3 x 39.4 x 3.2 in)
-
Weight:
4.8 kg (10.6 lb)
-
Material:
Stainless Steel
-
Colors:
Black, White, Custom RAL
-
Finishes:
24K Gold, Polished, Brushed
Regulations
-
IP rating:
IP64
(3) -
EN54–24:
EN 54–24:2008 compliant
- (1) With dedicated preset.
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
- (3) More complete water protection with K–IP65KITA and K–IP65KITB accessories (IP65 compliant)
-
Passive loudspeakers requires dedicated preset loaded on board of K–array amplifiers.
-
New materials and design are introduced into existing products without previous notice.
