Specifications

General

• Type:

  Active subwoofer

• Transducers:

  2 x 18″ woofer à aimant néodyme

• Frequency Response:

  30 Hz – 150/450 Hz (–6 dB) crossover dependant

  ⁽¹⁾

• Crossover:

  DSP–controlled, Low Pass @ 150 Hz, preset dependant

• Max SPL:

  141 dB

  ⁽²⁾

• Coverage:

  Omni

• Connectors:

  Line Input

  2x XLR–F analog / AES3

  Line Output

  2x XLR–M Link analog / AES3

  Speaker Output

  2x SpeakON NL4

  Power

  powerCON TRUE1 TOP

  Networking and Data

  1x RJ45

  4x USB–A

• Nominal Impedance:

  4ohm subwoofer

• Controllers:

  Wi–Fi dedicated Mobile APP

  K–framework3 via wired Ethernet connection

• Built–in DSP:

  Input gain, routing matrix, delay, full parametric IIR filters (Peaking, Shelving, Hi/ Lo pass, Hi/Lo Butterworth), Onboard preset, Remote monitoring

Handling and Finishes

• Dimensions (W x H x D):

  1106 x 500 x 580 mm

  (43.5 x 19.7 x 22.8 in)

  ⁽³⁾

• Weight:

  60 kg (132.3 lb)

• Material:

  Polyurea coated birch plywood

• Colors:

  Black/White/Custom RAL

Regulations

• IP rating:

  53

  ⁽⁴⁾

Amplifier

• Amp Module:

  4–ch Class D

• Output Power:

  4 x 2500W @ 4ohm

  ⁽⁵⁾

• Power Consumption:

  600 VA @ 8 Ω load, Pink noise, 1/8 rated power

• (1) With dedicated preset
• (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
• (3) Included 17 mm (0.7 in) removable rubber feet
• (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K–array directly to discuss best protection practices.
• (5) CTA–2006 Standard single channel driven

• New materials and design are introduced into existing products without previous notice.