Introduction
Pinnacle K–FoH2 is the ultimate dedicated system from the K–array Pinnacle family, thought to have full control of the stage mix from the FoH mixing console during a live event, in concert or tour, coming in a practical, compact and robust flight case to host the all kit with cables and mounting floor stands, easy to transport and store.
Using 2x Python–KP52 I in a 2.1 stereo configuration with a Thunder–KS2 I subwoofer, well known for their linear frequency response even when stressed by high powers and levels, this system is recommended when high emissions come from the stage and the PA, but sound engineers don’t want to miss in definition and intelligibility.
2 x Python–KP52 I
1 x Thunder–KS2 I
2 x Floor stand
1 x Flightcase – floor stands + cables included in the case
Technical sheet
Python–KP52 I
General
-
Type:
Line array
-
Transducers:
6 x 3.15″ woofers à aimant néodyme
-
Frequency Response:
120 Hz – 18 kHz (–6 dB)
(1) -
Sensitivity (1W/1m):
96 dB SPL
-
Max SPL:
128 dB (peak)
(2) -
Rated Power:
360 W AES
-
Coverage:
V. 10° – 45° | H. 90°
-
Connectors:
SpeakOn NL4 1+ 1– (signal); 2+ 2– (through)
-
Nominal Impedance:
8 Ω / 32 Ω selectable
-
Max SPL (Full–Range preset):
116 dB (peak)
(3) -
Frequency Response (Full–range preset):
70 Hz – 18 kHz (–6dB)
(4)
Handling and Finishes
-
Dimensions (W x H x D):
89 x 520 x 118 mm (3.5 x 20.5 x 4.7 in)
-
Weight:
5.8 kg (12.78 lb)
-
Material:
Stainless Steel
-
Colors:
Black, White, Custom RAL
-
Finishes:
24K Gold, Polished, Brushed
Regulations
-
IP rating:
IP64
(5) -
EN54–24:
EN 54–24:2008 compliant
(6)
- (1) With dedicated preset.
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
- (3) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
- (4) With dedicated FULL–RANGE preset
- (5) More complete water protection with K–IP65KITA and K–IP65KITB accessories (IP65 compliant)
- (6) See specification for EN 54–24 applications in products user’s guide
-
Passive loudspeakers require a dedicated preset loaded onboard K–array amplifiers.
-
New materials and design are introduced into existing products without previous notice.
Thunder–KS2 I
General
-
Type:
Active subwoofer
-
Transducers:
18″ woofer à aimant néodyme
-
Frequency Response:
35 Hz – 150/450 Hz (–6 dB) crossover dependant
(1) -
Crossover:
DSP–controlled, Low Pass @ 150 Hz, preset dependant
-
Max SPL:
137 dB
(2) -
Coverage:
Omni
-
Coverage:
Line Input
2x XLR–F analog / AES3
Line Output
2x XLR–M Link analog / AES3
Speaker Output
2x SpeakON NL4
Power
powerCON TRUE1 TOP
Networking and Data
1x RJ45
4x USB–A
-
Nominal Impedance:
8ohm subwoofer
-
Controllers:
Wi–Fi dedicated Mobile APP
K–framework3 via wired Ethernet connection
Handling and Finishes
-
Dimensions (W x H x D):
650 x 500 x 580 mm
(25.6 x 19.7 x 22.8 in)
(3) -
Weight:
37,6 kg (82.9 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP rating:
IP53
(4)
Amplifier
-
Amp Module:
4–ch Class D
-
Output Power:
4 x 1500W @ 4ohm
(5) -
Power Consumption:
600 W @ 8 Ω load, Pink noise, 1/4 rated power
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K–array directly to discuss best protection practices.
- (5) CTA–2006 Standard single channel driven
-
New materials and design are introduced into existing products without previous notice.
Downloads:
TECHDOCS:
