Vyper-KV52 II

    K-Array

    The Vyper–KV52 II is a 52–cm–long passive line array comprised of eight 1” neodymium magnet transducers housed in an ultra–flat invisible and resistant aluminum chassis designed for elegant and discreet installations. Featuring the PAT (pure array technology), it assures high–level sound with even coverage and maximum quality audio experience.

    After-sales service 6 days a week
    Free quote
    Free delivery

    Introduction

    Vyper–KV52 II est un passive loudspeaker ultra–plat composé de huit transducteurs à aimant en néodyme de 1” chacun, logés dans un châssis en aluminium élégant mais robuste, avec un nouveau frameless chassis designed for very elegant discreet installations, perfect for a clean bracketless application on any flat surface.

    Les huit haut–parleurs à cône rapprochés offrent de véritables caractéristiques de ligne source : phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker.

    Two different values ofimpedance (16Ω – 64Ω) allow to connect up to 16x Vyper–KV52 II loudspeakers at 64Ω impedance to the same 4Ω amplifier output channel, which eliminates the need for 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory.

    Modèle KV52 II noir

    Modèle KV52W II blanc

    KV52X couleur et finition RAL personnalisables (boîtier + grille)

    new! KV52M II, KV52MW II, KV52MX II (seulement couleurs RAL) = TRAITEMENT MARIN (sur demande)

    Tous les composants Vyper–KV52 II sont conçus par le département RD de K–array et sont fabriqués sur mesure sous le système de contrôle qualité K–array en Italie.

    Technical sheet

    Specifications

    General

    • Type:

      Enceinte line array passive

    • Transducers:

      8x 1” Neodymium magnet woofers

    • Frequency Response:

      150 Hz – 18 kHz (–6 dB)

      (1)

    • Max SPL:

      114 dB peak

      (2)

    • Rated Power:

      150 W

    • Coverage:

      V. 10° | H. 140°

    • Connectors:

      2x Euroblock 2,5/ 2–ST–5,08

    • Nominal Impedance:

      16 Ω – 64 Ω

    Handling and Finishes

    • Dimensions (W x H x D):

      40 x 500 x 22 mm (1.6 x 19.7 x 0.9 in)

    • Weight:

      0.8 kg (1.54 lb)

    • Material:

      Aluminum

    • Colors:

      Black, White, Custom RAL

    • Finishes:

      24K Gold, Polished

    Regulations

    • IP rating:

      IP65

    • (1) With dedicated preset
    • (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m

    • Passive loudspeakers require dedicated presets loaded onboard K–array amplifiers.

      New materials and design are introduced into existing products without previous notice.

    Downloads:

    TECHDOCS:

    Vyper–KV52 II DatasheetVyper II USER GUIDEVyper–KV52 ll DWG 3DVyper–KV52 II LayoutVYPER–KV52 II BIMCE Declaration of ConformityEASE DATA Rev 2Vyper Drilling Template – A0

    Recommended for you

    Air 5Fan

    ProLights
    Beam moving batten, 5x40W RGBW/FC LED, pivot control, infinity pan/tilt, 16 kg

    Aliseo 19.1

    Pequod
    The new Aliseo loudspeaker system is the new challenge that Pequod Acoustics has undertaken, designing an elegant system in composite material using the highest quality and specialized 5 “units. The system has an horizontal, symmetrical, and extremely compact design in relation to the performance

    ALTANO 18.1

    Pequod
    The Altano system is a long excursion acoustic suspension subwoofer consisting of 3 12” long–excursion woofers housed in three ovoid volumes structure connected and fused to form an extremely light and rigid monolithic structure. The total power of the system is over 2700 Watts, having high sensitivity (97 dB 1W/1m), with a total radiant surface equivalent to a 21–inch diaphragm.

    Anakonda-KAN200

    K-Array
    Lightweight and able to take any form, this revolutionary loudspeaker is 2 meters long with 8 x 1’’ drivers that deliver a max power of 300W at 64Ω impedance

    Anakonda-KAN200+

    K-Array
    Lightweight and able to take any form, this revolutionary loudspeaker is 2 meters long with 16 x 1’’ drivers that deliver a max power of 600W at 32Ω impedance

    Anakonda-KAN200+8

    K-Array
    Lightweight and able to take any form, this revolutionary loudspeaker is 2 meters long with 16 x 1’’ drivers that deliver a max power of 600W at 8Ω impedance

    AS 80

    Midas
    HMAC to Dual HMAC Converter

    Astra Hybrid330

    ProLights
    Ultra compact hybrid moving beam–spot, with a 330W LED Source

    Astra Hybrid420

    ProLights
    Moving hybrid beam–spot, with 420W USHIO NSL421

    Astra Profile400

    ProLights
    400W high–precision LED moving profile, 6,5°–50° zoom, CMY,CTO, 4f prism, 27,6kg

    Astra Wash19Pix

    ProLights
    19x40 W RGBW moving wash light with 4°–54° zoom, pixel control and pixel ring

    Astra Wash19Pix

    ProLights
    19x40 W RGBW moving wash light with 4°–54° zoom, pixel control and pixel ring