Introduction
DN4816–O
The DN4816–O is the perfect solution for connecting additional line outputs to your monitor or FOH console. It provides 16 analog outputs (e.g., to connect wireless transmitters for in–ear monitoring). Additionally, it provides an Ultranet input, that can be used to forward Signals from an AIR mixer via StageConnect.
Features
-
Breakout box with 16 balanced XLR line out for StageConnect and Behringer Ultranet systems
-
Analog output box for other StageConnect devices, Midas HUB4 and Behringer WING or Ultranet transmitters such as Midas MR18/M32 and DL16/DL32 stageboxes
-
StageConnect 32–channel audio transmission at sub–millisecond latency, 24–Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
-
Two units can be cascaded for a total of 32 low–latency analogue outputs fed from a single StageConnect source
-
Flexible connectivity on stage and between side racks using any balanced microphone cable
-
Supports bi–directional audio configurations, with control data and 12 VDC / 18 W remote power
-
Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
-
Operates in Master mode, or as Slave synchronised to StageConnect or Ultranet input streams
-
Ultranet output for feeding Turbosound iQ speaker systems and Behringer P16 personal monitoring directly from StageConnect bus
-
External power supply for standalone use and offering remote power on the StageConnect Master output
Technical sheet
Specification
Processing
| D/A Conversion |
24–Bit, 48/44.1 kHz, 114 dB |
| StageConnect bus capacity |
32 ch, 24–Bit PCM audio |
| I/O latency |
≤0.5 ms |
Connectors
| Analogue outputs |
16 x XLR male jacks, balanced |
| Impedance |
100 Ω unbalanced / 200 Ω balanced |
| Max. output level |
+21 d B u |
| Ultranet |
2 x RJ45 |
| Shielded CAT5e cable max. length |
75 m |
| StageConnect |
1 XLR male, 1 XLR female |
| Shielded bal. 110–Ohm DMX cable |
max. 40 m |
| USB |
Type B |
System
| Frequency Response |
20 Hz – 20 kHz ±0.2 dB |
| Dynamic range |
110 d B |
| Crosstalk rejection @ 1 kHz, adjacent channels |
110 d B |
| Noise (20 Hz – 20 kHz bandwidth) |
–90 dBu |
| Distortion |
0.004% / 1 kHz / 0 dBu out |
Power
| Power |
12 VDC / 2.5 A (30 W) adapter included, remote power input via SLAVE XLR (female), remote power output via MASTER XLR (male) 12 VDC / 1.5 A (18 W) |
| Power Consumption |
9 W |
Physical
| Standard Operating Temperature Range |
5° – 45° C (41° – 113° F) |
| Dimensions |
49 x 483 x 169 mm (1.9 x 19.0 x 6.7″) |
| Weight |
2.2 kg (4.9 lbs) |
