Introduction
DN4816–I
The DN4816–I is the perfect solution for connecting additional line inputs to your monitor or FOH console. It provides 16 analogue inputs to connect wireless receivers or other external audio players.
Features
-
Breakout box with 16 balanced XLR line inputs for StageConnect and Behringer Ultranet systems
-
Can be used as analogue input box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers such as P16 personal monitoring mixers
-
StageConnect 32–channel audio transmission at sub–millisecond latency, 24–Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
-
Two units can be cascaded for a total of 32 low–latency analogue line inputs feeding the StageConnect bus
-
Flexible connectivity on stage and between side racks using any balanced microphone cable
-
Supports bi–directional audio configurations, with control data and 12 VDC / 18 W remote power
Technical sheet
Specification
Processing
| A/D Conversion |
24–Bit, 48/44.1 kHz, 114 dB |
| StageConnect bus capacity |
32 ch, 24–Bit PCM audio |
| I/O latency |
<0.05 ms |
Connectors
| Analogue inputs |
16 x XLR female jacks, balanced |
| Impedance |
20 kΩ unbalanced / 40 kΩ balanced |
| Max. input level |
+21 dBu |
| Ultranet |
2 x RJ45 |
| Shielded CAT5e cable max. length |
75 m |
| StageConnect |
1 XLR male, 1 XLR female |
| Shielded bal. 110–Ohm DMX cable |
max. 40 m |
| USB |
Type B |
System
| Frequency Response |
20 Hz – 20 kHz ±0.2 dB |
| Dynamic range |
106 dB |
| Cross talk rejection @ 1 kHz, adjacent channel |
106 dB |
| Noise (20 Hz – 20 kHz bandwidth) |
–106 dBFS |
| Distortion |
0.004% / 1 kHz / 0 dBu in |
Power
| Power |
12 VDC / 2.5 A (30 W) adapter included, remote power input via SLAVE XLR (female), remote power output via MASTER XLR (male) 12 VDC / 1.5 A (18 W) |
| Power Consumption |
8.5 W |
Physical
| Standard Operating Temperature Range |
5° – 45° C (41° – 113° F) |
| Dimensions |
49 x 483 x 169 mm (1.9 x 19.0 x 6.7″) |
| Weight |
2.2 kg (4.9 lbs) |
